Clean Tiles with Washing Soda: Easy Home Guide

Graying grout and a dull film on floor tiles can quickly spoil the look of your kitchen, bathroom, or patio. Before reaching for harsh chemical cleaners, take a look in your cupboard. A tried-and-true home remedy can often work wonders: washing soda. This simple powder is a powerful weapon against dirt, grease, and discoloration.

Washing soda cleans effectively while also being affordable. It is versatile and, when used correctly, safe for most ceramic and porcelain tiles. This guide shows you how to make your tiles and grout shine like new again with washing soda.

What is washing soda, and why is it such an effective cleaner?

The term “soda” is often used for several different white powders. For powerful tile cleaning, it is important to know the difference and understand how their chemical properties work for you.

What’s the difference between baking soda, washing soda, and baking powder?

You will mainly find three products in stores that are easy to confuse:

• Baking soda (sodium bicarbonate): Also known as bicarbonate of soda. It is mild, food-safe, and suitable for light cleaning tasks, baking, or neutralizing odors.
• Washing soda (sodium carbonate): This pure soda, often sold as soda crystals, is the stronger option. It is significantly more alkaline than baking soda and has considerable grease- and dirt-cutting power. Washing soda is the right choice for intensive tile and grout cleaning.
• Baking powder: A mixture of baking soda, an acid (e.g. cream of tartar), and a leavening agent. It is less suitable for cleaning because the acid partly neutralizes the baking soda’s alkaline effect.

The methods described in this article use washing soda (sodium carbonate).

How does washing soda remove dirt and grease?

Washing soda’s impressive cleaning power is based on its chemical composition. Dissolved in water, it creates a strongly alkaline solution with a high pH value. This solution breaks down stubborn dirt on a chemical level.

Fats and oils, which are particularly likely to build up in kitchen grout, are converted into water-soluble glycerin and soap through a process called saponification. This makes them easy to rinse away. Washing soda also softens the water, further increasing its cleaning power. The powder’s fine crystals also act as a gentle abrasive, helping to loosen dirt mechanically without scratching the tile surface.

Washing soda (sodium carbonate) is a salt that reacts strongly alkaline when dissolved in water. This is why it is effective at dissolving fats and proteins.

How do you clean tiles and grout with washing soda? A step-by-step guide

With the right mixture and technique, your tiled floors and walls will be cleaner than ever. The process is straightforward and requires only a few tools.

How to mix the right washing soda paste

For targeted, intensive cleaning, a paste is ideal because it adheres well to surfaces and grout. The mixing ratio is simple:

1. Put three parts washing soda powder in an old bowl.
2. Slowly add one part water.
3. Stir both together with a spoon or spatula until you have a thick, spreadable paste. It should have roughly the consistency of toothpaste.

If the paste is too runny, add more washing soda. If it is too crumbly, add water one drop at a time.

How to use it on tiled surfaces

First remove loose dirt and dust by sweeping or vacuuming. Then apply the washing soda paste to the tiles with a sponge or cloth. For large areas, you can also add washing soda directly to warm cleaning water (approx. 1-2 tablespoons per 5 liters of water) and mop the floor with it. Leave the solution or paste to work for about 15 to 30 minutes. Then scrub the surface with a brush or floor scrubber and rinse thoroughly with clean water. A final wipe with a microfiber cloth prevents limescale marks.

Cleaning grout: How to brighten it up

Grout is porous, so dirt becomes particularly deeply embedded. This is where washing soda paste really comes into its own. Apply the paste directly to the grout with an old toothbrush or a specialized grout brush such as the

2-in-1 grout and tile brush

View product

Leave the paste to work for at least 30 minutes, or up to one hour for heavy discoloration. Then scrub the grout vigorously with the brush. Mechanical scrubbing is essential for removing loosened dirt from the pores. A brush with sturdy bristles, such as the

2-in-1 tile and grout brush 30 cm Gray/Blue

View product

What else can washing soda be used for around the home and garden?

Washing soda is useful for much more than just cleaning tiles. It is a true all-around cleaner for the home and garden.

• Unclogging drains: A mixture of washing soda and hot water dissolves grease and soap residue in clogged drains.
• Burnt-on food in pots: Boil a washing soda solution in the pot to remove burnt-on residue with ease.
• Patio slabs: In the Garden + Outdoor section, a washing soda solution removes green growth and algae from paving slabs and wooden elements.
• Odor absorber: An open bowl of washing soda absorbs unpleasant odors in the fridge or trash cans.

For specialist cleaning tasks in commercial settings, you will also find suitable products in our business supplies range.

Which materials should you avoid cleaning with washing soda?

Despite its versatility, washing soda isn't suitable for every surface. Its highly alkaline properties can permanently damage delicate materials. Avoid using it on the following surfaces:

• Natural stone: Marble, granite, limestone, and slate can become dull or stained when exposed to the solution.
• Aluminum: Washing soda reacts with aluminum and can cause discoloration.
• Linoleum and cork flooring: It can damage the protective layer on these floors, making them brittle.
• Painted and waxed surfaces: Washing soda can dissolve and remove paint and wax coatings.

Alternatives to washing soda: What if it isn't enough?

Even household remedies have their limits. For certain types of dirt or very stubborn stains, other products or tools may work better.

Vinegar or citric acid: These acids are ideal for removing limescale, which is often found in the Sanitary + Irrigation section. However, never mix acids directly with washing soda, as they neutralize each other. Use caution with cement-based grout, since acid can damage the cement.

Oxygen bleach (sodium percarbonate): Often sold as stain remover salt, this product works well on organic discoloration, such as mold, coffee, and red wine stains. When dissolved in water, it breaks down into washing soda and active oxygen, which has a bleaching and disinfecting effect.

Steam cleaner: A steam cleaner offers a purely physical, chemical-free cleaning method. Hot steam loosens even deeply embedded dirt and bacteria from the pores of tiles and grout. It's an excellent addition to cleaning with washing soda or an alternative to it.

Unlike many specialty cleaners, pure washing soda is completely biodegradable. You can save money, reduce packaging waste, and help protect the environment.

Cleaning with washing soda is a simple, effective way to restore shine to tiles and grout. This tried-and-true household remedy can save you money and help protect the environment. The right brushes and tools make the job even easier. Give it a try and see the results for yourself.

Frequently asked questions

Which type of soda is best for cleaning tiles?

Use washing soda (sodium carbonate), also known as soda crystals. It's more alkaline than baking soda (sodium bicarbonate) and removes grease and stubborn dirt from grout and tiles more effectively. Baking soda is better for light dirt.

Can I use washing soda to remove mold from grout?

Washing soda cleans and has a mild disinfecting effect, which can help with surface mold. However, it often isn't enough for deeply embedded mold. After the initial cleaning, treat the area with high-strength alcohol or a specialty mold remover.

Does washing soda damage grout?

Cement grout is generally resistant to alkaline substances and won't be damaged by a standard washing soda solution. Take more care with silicone grout and keep the contact time short. Always test the paste on an inconspicuous area first, especially on colored grout.

How long should I leave washing soda paste on tiles?

Contact time depends on how dirty the surface is. For general tile cleaning, 15 to 30 minutes is enough. For heavily soiled grout, you can leave the paste on for an hour or longer before scrubbing.

Is washing soda environmentally friendly?

Yes. Washing soda is a naturally occurring mineral and is fully biodegradable. It's an environmentally friendly alternative to many chemical specialty cleaners because it contains no harmful phosphates or surfactants. It also helps reduce packaging waste and wastewater pollution.